Product

332108 TAPE PIPE IDENTIFICATION #2108, BS 1710 ORANGE W150MMX30MTR

impacode 332108
uom(单位) NRL
title(品名) 332108 TAPE PIPE IDENTIFICATION #2108, BS 1710 ORANGE W150MMX30MTR
desc(描述) Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.
cdesc(自动翻译) 332108 编号为2108的胶带管路标识,BS 1710 橙色,W150mmx30米。应在每个房间至少标记一次;在舱壁和甲板的每个穿孔点附近,靠近每个阀门以及沿管道长度3-5米范围内。根据局部条件,由于管道弯曲或不同服务的管道紧密相邻,可能需要增加更多的标记。在应用前,管道应清洁无尘无油。胶带应至少在管道的“盲侧”上重叠20毫米,但对于外周直径超过200毫米的管道,胶带只需覆盖管道半周长。
Request For Quotation
  • Introduce
  • Argument

以上内容为自动翻译的内容,仅供参考,如需选购请发邮件咨询shipmro@qq.com

This content is automatically translated and is for reference only. For inquiries about enrollment and purchases, please email shipmro@qq.com

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Copyright © 2024 Xinhangbao General Equipment All Rights Reserve

WhatsApp

+86 13852833791