impacode | 332113 |
---|---|
uom(单位) | NRL |
title(品名) | 332113 TAPE PIPE IDENTIFICATION #2113, BS1710 AUXILIARY BLUE 50MMX30M |
desc(描述) | Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe. |
cdesc(自动翻译) | 332113 缠带管标识#2113,BS1710辅助蓝色50mmx30m 管道应在每个房间至少标记一次;在舱壁和甲板的每个穿透点,靠近每个阀门以及沿管道长度3-5米范围内应进行标记。根据局部条件,由于管道弯曲或不同服务的管道紧密相邻,可能需要增加更多的标记。 应在应用前确保管道清洁无尘无油。缠带应至少在管道“盲侧”上重叠20毫米,但对于外径超过200毫米的管道,缠带只需覆盖管道周长的一半。 |
332121 胶带管路标识#2121,BS 1710 深紫罗兰色 W50mmx30米 需要在每个房间至少标记一···
More332120 缠带式管道标识#2120,BS1710 深棕色W50mmx30m 管道应在每个房间至少标记一次;···
More332119 缠带管路标识#2119,BS 1710 海军绿,50mm宽x30米长 管道应在每个房间至少标记···
More332118 缠带管道标识#2118,BS 1710 蓝色 W50mmx30米 需要在每个房间至少标记一次管道···
MoreCopyright © 2024 Xinhangbao General Equipment All Rights Reserve