331045 TESTER HEAT DETECTOR FTH011, FOR EXPLOSION PROOF AREA

impacode	331045
uom(单位)	PCE
title(品名)	331045 TESTER HEAT DETECTOR FTH011, FOR EXPLOSION PROOF AREA
desc(描述)	Used for carrying out the operation test of the heat detector by utilizing chemical reaction of quicklime and water to generate the high temperature vapor. The tester can also be used at explosion-proof area, because it does not use fire during the operation test. After the vapor generation is finished, wait about 10 minutes before removing the heat generating material from the container because the heat generating material is hot. In case of using the tester in the explosion-proof area, the applicable gases are limited to Grade IIB, T4 or less according to Gas Classification (Ministry of Labour , Research institute of Industrial Safety Japan) and those having the ignition temperature of 425℃ or over. The tester is the approved product of Fire Protection Equipment & Safety Center of Japan, and it is required to be calibrated every 10 years. (The calibration label should be checked.) Support rods are sold separately.
cdesc(自动翻译)	331045 测试器，热探测器 FTH011，防爆区域适用用于通过利用生石灰与水的化学反应产生高温蒸汽来执行热探测器的操作测试。这种测试器也可用于防爆区域，因为其操作测试过程中不使用明火。在生成蒸汽后，应等待约10分钟再从容器中取出发热材料，因为发热材料会很烫。如在防爆区域使用该测试器，适用的气体仅限于根据《日本劳动省工业安全研究所》的气体分类为IIB级别、T4或更低，并且其引燃温度需达到425℃或以上。该测试器已获得日本消防设备及安全中心的认可产品，每10年需要校准一次（请检查校准标签）。支撑杆单独销售。