Product

332130 TAPE PIPE #2130 ISO 14726 &, BS1710 FLOW ARROWS 50MMX30M

impacode 332130
uom(单位) NRL
title(品名) 332130 TAPE PIPE #2130 ISO 14726 &, BS1710 FLOW ARROWS 50MMX30M
desc(描述) Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.
cdesc(自动翻译) 332130 缠带管#2130 ISO 14726 & BS1710 流程箭头 50mmx30米 管道应在每个房间至少标记一次;在舱壁和甲板的每个穿透点,靠近每个阀门以及沿管道长度3-5米范围内。根据局部条件,可能需要因管道弯曲或不同服务的管道靠近而增加标记。 应在应用前确保管道无尘无油。缠带应在管道的“盲侧”上至少重叠20毫米,但对于外周直径超过200毫米的管道,只需覆盖管道半周长即可。
Request For Quotation
  • Introduce
  • Argument

以上内容为自动翻译的内容,仅供参考,如需选购请发邮件咨询shipmro@qq.com

This content is automatically translated and is for reference only. For inquiries about enrollment and purchases, please email shipmro@qq.com

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Copyright © 2024 Xinhangbao General Equipment All Rights Reserve

WhatsApp

+86 13852833791