Product

332150 TAPE PIPE IDENTIFICATION #2150, ISO 14726 WHITE W50MMX30MTR

impacode 332150
uom(单位) NRL
title(品名) 332150 TAPE PIPE IDENTIFICATION #2150, ISO 14726 WHITE W50MMX30MTR
desc(描述) Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.
cdesc(自动翻译) 332150 录像带管道标识#2150,ISO 14726 白色50mmx30米 钢管应在每个房间至少标记一次;在舱壁和甲板的每个穿孔点附近,靠近每个阀门以及沿着管道长度3-5米范围内。根据局部条件,可能需要增加标记,因为管道弯曲或不同服务的管道靠近。在应用之前,管道应清洁无尘和油污。胶带应至少在管道的“盲侧”上重叠20毫米,但对于外径超过200毫米的管道,胶带只需覆盖管道周长的一半。
Request For Quotation
  • Introduce
  • Argument

以上内容为自动翻译的内容,仅供参考,如需选购请发邮件咨询shipmro@qq.com

This content is automatically translated and is for reference only. For inquiries about enrollment and purchases, please email shipmro@qq.com

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Copyright © 2024 Xinhangbao General Equipment All Rights Reserve

WhatsApp

+86 13852833791