| impacode | 633451 |
|---|---|
| uom(单位) | SET |
| title(品名) | 633451 CUTTER VALVE SEAT WITH CUTTERS, FOR 1-4" 4'S |
| desc(描述) | A set is comprised as follows: (1) Spindle (2) Handle (3) Fixing Bed (4) Lock Nut & Adjusting Screw (5) 4" cutter (6) 3" cutter (7) 2" cutter (8) 1" cutter These valve seat cutting tools are easier than ordinary type cutters in assembly and handling for precision cutting work. Remove the valve cap or flange and fit the suitable cutter to the spindle. Then, set the fixing bed using a tightening bolt for the cap or flange. Check that the cutter fits horizontally with the valve seat and is in the center position. At this point you set the adjustable screw to find the best position of the cutter. After adjustment, begin the cutting operation by turning the handle clockwise. In case of slant surface cutting, please refer to the following drawing. A standard set contains 1", 2", 3", and 4" cutters, but other sized cutters, 1/2", 3/4", 1-1/4", 1-1/2", 2-1/2", 5", and 6" are also available upon request. |
| cdesc(自动翻译) | 633451 切割阀座切割器，适用于1-4英寸4'。一套包括以下部件： (1) 轴承 (2) 手柄 (3) 固定基座 (4) 锁紧螺母和调节螺丝 (5) 4英寸切割器 (6) 3英寸切割器 (7) 2英寸切割器 (8) 1英寸切割器 这些阀座切割工具在组装和精确切割工作中比普通切割器更易于操作和处理。首先，移除阀盖或法兰，将合适的切割器安装到轴承上。然后，使用紧固螺栓固定阀盖或法兰的基座。确保切割器水平对齐于阀座并处于中心位置。此时，调整调节螺丝找到切割器的最佳位置。调整完毕后，通过顺时针转动手柄开始切割操作。如果需要切割斜面，请参阅相关图纸。标准配置包含1英寸、2英寸、3英寸和4英寸切割器，但也可以根据需求提供其他尺寸的切割器，如1/2英寸、3/4英寸、1-1/4英寸、1-1/2英寸、2-1/2英寸、5英寸和6英寸。 |
以上内容为自动翻译的内容，仅供参考，如需选购请发邮件咨询shipmro@qq.com
This content is automatically translated and is for reference only. For inquiries about enrollment and purchases, please email shipmro@qq.com
Copyright © 2024 Xinhangbao General Equipment All Rights Reserve
